What are the Types of Transmission Impairments?

Transmission Impairments

Impairments may be called as a noise or anything else that might cause an error in data transmission. There are various kinds of transmission impairments in the network while transferring data and information through the network.

Types of transmission impairments

Attenuation

Attenuation means a loss of energy. The strength of a signal falls off with distance over any transmission medium.

For guided media, this reduction in strength or attenuation is generally logarithmic and is thus typically expressed as a constant number of decibels per unit distance.

Distortion

Distortion means that the signal changes its form or shape. Delay distortion is a phenomenon peculiar to guided transmission media. The distortion is caused by the fact that the velocity of propagation of a signal through a guided medium varies with frequency.

For a band limited signal, the velocity tends to be highest near the center frequency and lower toward the two edges of the band. Thus, various frequency components of a signal will arrive at the receiver at different times. This effect is referred to as delay distortion, as the received signal is distorted due to a variable delay in its components.

Noise

Noise refers to any unwanted signal. For any data transmission event, the received signal will consist of the transmitted signal, modified by the various distortions imposed by the transmission system, plus additional unwanted signals that are inserted somewhere between transmission and reception;

The latter, undesired signals are referred to as a noise-a major limiting factor in communications system performance.